T. 704-312-1600
Aerise Logo
  1. Aerise
  2. Video Instructions
Step by Step

Video Instructions

Clear Guidance for Every Step

Learn how to set up, take down, and pack away an Aerise inflatable tent, as well as how to install the available accessories. Each process is clearly demonstrated so the tent can be prepared for use quickly and correctly.

Tent Setup and Takedown

This section explains how to use the inflatable tent pump correctly, set up and take down the tent, and pack it away compactly.

Setup

Inflate the tent through the gray valve until air escapes from the red pressure relief valves.

Setup

Takedown

Open the valves to release the air from the tent. It can then be rolled up and packed away.

Takedown

Aerise tents can be inflated easily with the included hand pump.

Inflatable Tent Pump

The inflatable tent pump can be easily connected to inflate the tent or top off the air pressure.

Inflatable Tent Pump

Installing the Accessories

Sidewalls, awnings, weights, and other accessories expand the range of uses for an Aerise inflatable tent. The demonstrations show how to install each component correctly.

Sidewall

All sidewall models can be attached to the tent in just a few steps using zippers.

Sidewall

Rescue Floor and Sidewall

The Rescue floor and Rescue sidewall are connected using twist fasteners.

Rescue Floor and Sidewall

Textile Floor

The textile floor is spread out beneath the tent and secured to the tent feet using click fasteners.

Textile Floor

Wall Ballast Weights

The wall ballast weight is filled with water or sand and attached to the eyelets on the sidewall.

Wall Ballast Weights

White foot of an inflatable tent weighted down with a foot ballast

Leg Weights

Depending on the requirements, one to three leg weights can be attached to each tent foot using click fasteners and tensioning straps.

Leg Weights

Foot of a white inflatable pavilion weighted down with a water ballast barrel

Water Ballast Barrel

The water ballast barrel is secured to the tent leg using tensioning straps.

Water Ballast Barrel

Awning and Awning Banner

The awning structure is inflated before the awning banner is zipped into place.

Awning and Awning Banner

Tent Connection

The tent connection links two inflatable tents using zippers.

Tent Connection

The LED strips can be installed without tools beneath the roof cross of Aerise inflatable tents.

LED Strips

The dimmable LED strips are attached to the eyelets beneath the roof cross.

LED Strips

Explore More

Several white inflatable tents lined up at a market for French specialties
Here for you.
704-312-1600
Send Message
Your privacy is important to us
Cookie settings

We use cookies to ensure the reliable and secure operation of our website, to analyze its performance, and to display relevant content to you. You can decide which cookies you want to allow. For more information, please refer to our privacy policy.